Products
Contact Us
Phone : +86 0531-85908792
Email:Admin:zrsuns@outlook.com Sales:sales@rlaserpowersupply.com
Skype: ZRsunslaser
Q Q: 2407603284
Mobile :+86-13295411923
ZR-130W CO2 laser power supply
1.This 130W laser power supply’s circuit design is reasonable, It’s a high-grade laser engraving machine or cutting machine’s best choice. At the same time,it significantly extend the life time of 130-150W laser tube.
2. The 130W CO2 power supply’s output voltage abd current are large (AC220V input, the maximum output current up to 40mA, voltage up to DC50KV)I. it improves the laser power: (The average laser power is 130W and peak laser power is 150W). Thus this laser power supply can drive most brand 1600mm,1650mm or 1850mm 130W OR 150W CO2 laser tube made by different factories.
3.The 130W CO2 power supply has stable performance::Each power supply has been much more rigorous testing procedures and under full load high temperature (52~55 degrees celsius) 24 hours of aging. This feature ensures the power supply has stability.
ZR-130W CO2 laser power supply
Feature
1. Protection function: This laser tube's CO2 power supplies have open circuit protection: Under the condition of good protective earth, the high voltage CO2 power supplies can work in open-circuit for a short time, which could avoid the damage to the 130W CO2 power supplies
2.This laser tube's CO2 power supplies have a built-in network cable interface, which can be used to connect with external LCD module through the network cable. The external LCD module can display the working status, output current and common fault codes. This is helpful for operators to understand the working status of 130W CO2 power supplies and quickly solve problems. The output current can be adjusted through the rotary potentiometer of the liquid crystal module.
3. Good compatibility: The high voltage CO2 power supplies can drive EFR,Yongli,SPT,Weiju and other brand 1.6 or 1.65 meter length 130W CO2 laser tube and it also have a strong adaptability and fast response, cutting advantages of good effect.
4. Control is simple: This 130W CO2 power supplies use high or low level control, the use of TTL-level control of the laser can start and stop. At the same time it increases the protection switch, testing is through the external water and ventilation on this high voltage CO2 power supplies
5. This laser tube's CO2 power supplies adopt G/P/L/G/IN/5V as control signal output interface.The high voltage CO2 power supplies adopts aluminum upper cover and base, and galvanized steel shell.
6.Laser power control is simple on this laser tube's CO2 power supplies, 0-5V analog signal control the laser power can be used, It can also use the PWM (pulse width modulation) signal to control output laser power.
7. The laser tube's CO2 power supplies has stable working performance: Each high voltage CO2 power supplies has been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging, to ensure the stability of each 130W CO2 power supplies
Specification:
Input | Input voltage | AC220V±10% (AC110V specified while order) | ||
AC frequency | 47~440HZ | |||
Maximum input power | 970W | |||
Maximum input current | 4.3A | |||
Output | Maximum output voltage | 40KV | ||
Maximum output current | 36mA (depending on the laser tubes of different manufacturers) | |||
Efficiency | More than 90% (Full load) | |||
Response speed | Not more than 1ms | |||
Control lnterace | TTL multilevel switching control,effective level can be high and low selection (see control wining diagram) | |||
Insulation | lnput-output | AC 1500V 1 minutes not more than 10mA | ||
lnput-shell | AC 1500V 1 minutes not more than10mA | |||
Output-shell | Connection | |||
Open Circuit Protection | Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc) | |||
Environmental Requested | Working temperature | -10℃~50℃ | ||
Storage of temperature | -20℃~75℃ | |||
Relative Humidity | Maximum 85%RH (non-condensing) | |||
Altitude | 100,000 feet of work 200,000 feet of storage,dose not work | |||
Cooling methods | Forced air cooling (fan cooling) | |||
Dimensions (LxWxH) | 335mmx205mmx100mm |
Telephone contact
TELEPHONE
+86-539-8058588
MOBILE PHONE
086-13295411923
![](/uploads/image/20210107/1609994054132094.jpg)