Products
Contact Us
Phone : +86 0531-85908792
Email:Admin:zrsuns@outlook.com Sales:sales@rlaserpowersupply.com
Skype: ZRsunslaser
Q Q: 2407603284
Mobile :+86-13295411923
ZR-150WD CO2 laser power supply
1.The 150w laser psu box adopts one PCS fan for cooling. It use two Taiwan’s bearing which make the fan runs for very long time.
2.This external potentiometer laser psu box can adopts external LCD digital display module by network cable,which can show constant current laser power driving unit’s working current,working statues and failure code. It is very good function for both machine factory and machine users
3.This external potentiometer laser psu box selects H/L/P/G/IN/5V green terminal board to accept laser control signal and it has aluminum upper cover and base, galvanized sheet shell..
ZR-150WD CO2 laser power supply
Feature:
1.This external potentiometer laser psu box can adopts external LCD digital display module by network cable,which can show constant current of 150w laser psu box's working current,working statues and failure code. It is very good function for both machine factory and machine users
2.The 150w laser psu box adopts two PCS fans for cooling. It use two Taiwan’s bearing which make the fas run for very long time.
3.The analog signals of 0 to 5V or PWM signals can be selected for controlling and regulating this external potentiometer laser psu box's output laser power.
4.The 150w laser psu box has LCD display module: (optional) .Because of it, it do not need to open the outside case. Operator can simply find ordinary code faults and output current at LCD display screen of 150W laser psu box
5.This 150w laser psu box has high efficiency and quick response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 150W co2 laser tube.
and easy remove the trouble. Also the output current can be adjusted by potentiometer on the LCD module
6.This high voltage laser psu box terminal control is simple and adapted to high and low level signals. TTL level can be used to control the start and stop of laser power. At the same time, an abnormal protection switch was added to detect if the external water is ventilated or not.
7.This external potentiometer laser psu box selects H/L/P/G/IN/5V green terminal board to accept laser control signal and it has aluminum upper cover and base, galvanized sheet shell..
8.With open circuit protection, the external potentiometer laser psu box can work in an open-circuit state for a short time, which can avoid the damage of the 150w laser psu box caused by the bursting of the laser tube.
9.This high voltage laser psu box has good grounding protection: It can provide very safe protection for operators
Specification:
Input | Input voltage | AC220V±10% (AC110V specified while order) | ||
AC frequency | 47~440HZ | |||
Maximum input power | 1000W | |||
Maximum input current | 4.5A | |||
Output | Maximum output voltage | 40KV | ||
Maximum output current | 40mA (depending on the laser tubes of different manufacturers) | |||
Efficiency | More than 90% (Full load) | |||
Response speed | Not more than 1ms | |||
Control lnterace | TTL multilevel switching control,effective level can be high and low selection (see control wining diagram) | |||
Insulation | lnput-output | AC 1500V 1 minutes not more than 10mA | ||
lnput-shell | AC 1500V 1 minutes not more than10mA | |||
Output-shell | Connection | |||
Open Circuit Protection | Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc) | |||
Environmental Requested | Working temperature | -10℃~50℃ | ||
Storage of temperature | -20℃~75℃ | |||
Relative Humidity | Maximum 85%RH (non-condensing) | |||
Altitude | 100,000 feet of work 200,000 feet of storage,dose not work | |||
Cooling methods | Forced air cooling (fan cooling) | |||
Dimensions (LxWxH) | 350mmx221mmx105mm |
- Previous:ZR-40WD CO2 laser power supply
- Next:ZR-130W CO2 laser power supply
Telephone contact
TELEPHONE
+86-539-8058588
MOBILE PHONE
086-13295411923
![](/uploads/image/20210107/1609994054132094.jpg)